machine loads造句

• Gignatic machines load ore onto long trains .
  巨型机器将矿砂送进长列的火车中。
• In the movie clip , it is found that manual machine load the pearl on this place
  在视频中，手动机器人将珍珠放在红色标记上。
• Some typical machine attributes include the amount of memory , cpu type , cpu clock speed , and current machine load
  典型的机器属性包括内存数量、 cpu类型、 cpu时钟速度以及当前的机器负载。
• Dynamic data from grid resources , such as machine load or queue information , are updated continuously and automatically using information providers installed on each grid resource
  网格资源的动态数据，例如机器的负载或队列信息，都是使用每个网格资源上安装的信息提供者不断自动更新的。
• Machining deformation of aircraft monolithic component is simulated by finite element method ( fem ) and validated by experiment . the initial residual stress in pre - stretched plate is generated by simulating quenching and stretching processes . with a single tool - tooth milling process fem , the machining loads in monolithic component material removing is obtained . restart - calculation is put forward to complete the whole simulation of machining process . to verify the fem result , an experiment is carried out . the deformation distribution of the monolithic component resulting from fem shows a good agreement with the experiment result , which indicates that the key technologies presented in the paper are practicable and can be used to simulate the milling process of monolithic component to predict its deformation . lengthy and expensive trial and error experiment process can be avoided
  在模拟淬火、拉伸过程获得含有初始残余应力的预拉伸板材以及模拟单齿切削过程获得切削载荷的基础上,提出并采用接力算法,对一航空整体结构件的材料铣削过程进行有限元仿真,同时进行了试验研究.结果表明,有限元模拟的整体结构件的变形与试验具有一致性,从而证明提出的整体结构件加工仿真关键技术的可行性,避免了为研究加工变形而进行的繁琐的试错法
• Based on previous heuristic scheduling algorithms , multi - object scheduling of time and resource costs is implemented by introducing the conception of resource costs into the net , considering time and resource costs synthetically in the process . by tracing the virtual costs of machines in the algorithm , the using costs of those heavy load machines are increased dynamically and their chances of being used again are reduced , which results in a relative balance of machines loads in the scheduling result
  在前人启发式调度算法的基础上，通过在网中引入资源成本的概念，在算法的执行过程中综合考虑时间成本和资源成本，实现了资源成本与时间成本的多目标调度；通过在算法中对各机器虚成本的跟踪，动态增加当前系统中负载较大机器的使用成本，降低其再被使用的机会，使得调度结果中的各机器负载能相对均衡。
• Abstract : experiments were made on a ultrasonic machining tool with work - piece adhered to ultrasonic transducer head , to machine micro - holes on hard and brittle materials such as soda glass and si , to study the effects of tool materials ， work - piece materials ， amplitude ， machining load ， slurry concentration ， tool length and the size of work - piece on machining rate and wear ratio . in this experiment , the micro - tool was made through wedg
  文摘:通过以wedg放电加工手段制作微细超声加工用工具，在采用工件加振方式的微细超声加工机上对碳酸玻璃、半导体硅等硬脆材料试件进行微孔加工的实验，来探讨在某一特定加工条件下工具材料、工件材料、工件的振幅、加工静载荷、磨料悬浮液浓度、工具长度及工件尺寸等重要因素对加工速度、工具损耗率的影响，为微细超声加工技术的实用化提供参考依据。